显示该栏目以下所有产品
Orfitube™ System Create low-profile, lightweight outrigger systems with Orfitubes™. - Orfitube™ System is ideal for positioning following MP arthroplasty, extensor tendon surgery and nerve injuries. - No heat is required when bending Orfitube™, for best results use Bender Tool sold below. - Orfitube™ Kit includes ten 11-13/16" (30cm) long Orfitubes™, three spools of elastic thread in varying resistance levels and two bending rods. - Bend these hard plastic tubes by hand with bending rod inside of tube. - The Single Orfitube™ Adjuster puts you in full control of longitudinal and lateral position of Orfitubes. But there is more than one angle from which you can look at this product. - The compact design allows you to fix one individual adjuster for each finger. The adjusters are lightweight, very cost-effective and more elegant than ever before - Orfitube™ End Caps help prevent fraying of the elastic thread as it glides past the cap end on the tube (sold separately). - Thermoplastic material sold separately. - Replacement Tubes also available. NC33669 Orfitube™ Kit (1) Email for quotation NC33670 Orfitube™ End Caps (20) Email for quotation NC33674 Single Orfitube™ Adjuster Kit (5) Email for quotation NC33669-1 Orfitube™ Replacement Tubes (10) 11-13/16" (30cm) Email for quotation NC33669-3 Dynasyst Elastic Thread No. 1 200 grams Email for quotation
Orfitube™ System Create low-profile, lightweight outrigger systems with Orfitubes™. - Orfitube™ System is ideal for positioning following MP arthroplasty, extensor tendon surgery and nerve injuries. - No heat is required when bending Orfitube™, for best results use Bender Tool sold below. - Orfitube™ Kit includes ten 11-13/16" (30cm) long Orfitubes™, three spools of elastic thread in varying resistance levels and two bending rods. - Bend these hard plastic tubes by hand with bending rod inside of tube. - The Single Orfitube™ Adjuster puts you in full control of longitudinal and lateral position of Orfitubes. But there is more than one angle from which you can look at this product. - The compact design allows you to fix one individual adjuster for each finger. The adjusters are lightweight, very cost-effective and more elegant than ever before - Orfitube™ End Caps help prevent fraying of the elastic thread as it glides past the cap end on the tube (sold separately). - Thermoplastic material sold separately. - Replacement Tubes also available. NC33669 Orfitube™ Kit (1) Email for quotation NC33670 Orfitube™ End Caps (20) Email for quotation NC33674 Single Orfitube™ Adjuster Kit (5) Email for quotation NC33669-1 Orfitube™ Replacement Tubes (10) 11-13/16" (30cm) Email for quotation NC33669-3 Dynasyst Elastic Thread No. 1 200 grams Email for quotation
Orfitube可调式手指动态支具
Orfitube可调式手指动态支具套装，打造小巧、轻便的支架系统，是MP关节置换，伸指肌腱手术及神经损伤后的理想辅助器材。在弯折Orfitube™产品的过程中无需加热，为了让使用效果达到最佳，建议购买本产品配套工， Orfitube™弯曲工具套装（NC33673）。
整套产品包括十根11-13/16" (30厘米)长度的Orfitubes™管，三卷不同阻力水平的弹力线以及两根辅助弯曲杆。
- 弯折硬质塑料管时请务必将辅助弯曲杆置于管内
- 独立Orfitube™调节器能使您全方位控制横向及侧向管。但本产品不仅限于单一角度，您可以尝试更多角度。
- 紧凑型设计使您能在每个手指上装配调节器。较之前调节器更轻巧，实惠，外形亦更美观。
- Orfitube™端盖能防止弹力线在来回滑动时磨损（可单独购买）。
- 热塑材料单独出售。
- 替换支撑管亦有出售。
美国制造
| NC33669 | Orfitube可调式手指动态支具 | 电邮询价 |
| NC33670 | Orfitube™ 端盖 (20) | 电邮询价 |
| NC33674 | 单个 Orfitube™调节器套装 (5) | 电邮询价 |
| NC33669-1 | Orfitube™替换支撑管 (10) 11-13/16" (30厘米) | 电邮询价 |
| NC33669-3 | Dynasyst弹力线 1200克 | 电邮询价 |
Orfitube™ System Create low-profile, lightweight outrigger systems with Orfitubes™. - Orfitube™ System is ideal for positioning following MP arthroplasty, extensor tendon surgery and nerve injuries. - No heat is required when bending Orfitube™, for best results use Bender Tool sold below. - Orfitube™ Kit includes ten 11-13/16" (30cm) long Orfitubes™, three spools of elastic thread in varying resistance levels and two bending rods. - Bend these hard plastic tubes by hand with bending rod inside of tube. - The Single Orfitube™ Adjuster puts you in full control of longitudinal and lateral position of Orfitubes. But there is more than one angle from which you can look at this product. - The compact design allows you to fix one individual adjuster for each finger. The adjusters are lightweight, very cost-effective and more elegant than ever before - Orfitube™ End Caps help prevent fraying of the elastic thread as it glides past the cap end on the tube (sold separately). - Thermoplastic material sold separately. - Replacement Tubes also available. NC33669 Orfitube™ Kit (1) Email for quotation NC33670 Orfitube™ End Caps (20) Email for quotation NC33674 Single Orfitube™ Adjuster Kit (5) Email for quotation NC33669-1 Orfitube™ Replacement Tubes (10) 11-13/16" (30cm) Email for quotation NC33669-3 Dynasyst Elastic Thread No. 1 200 grams Email for quotation
Orfitube™ System Create low-profile, lightweight outrigger systems with Orfitubes™. - Orfitube™ System is ideal for positioning following MP arthroplasty, extensor tendon surgery and nerve injuries. - No heat is required when bending Orfitube™, for best results use Bender Tool sold below. - Orfitube™ Kit includes ten 11-13/16" (30cm) long Orfitubes™, three spools of elastic thread in varying resistance levels and two bending rods. - Bend these hard plastic tubes by hand with bending rod inside of tube. - The Single Orfitube™ Adjuster puts you in full control of longitudinal and lateral position of Orfitubes. But there is more than one angle from which you can look at this product. - The compact design allows you to fix one individual adjuster for each finger. The adjusters are lightweight, very cost-effective and more elegant than ever before - Orfitube™ End Caps help prevent fraying of the elastic thread as it glides past the cap end on the tube (sold separately). - Thermoplastic material sold separately. - Replacement Tubes also available. NC33669 Orfitube™ Kit (1) Email for quotation NC33670 Orfitube™ End Caps (20) Email for quotation NC33674 Single Orfitube™ Adjuster Kit (5) Email for quotation NC33669-1 Orfitube™ Replacement Tubes (10) 11-13/16" (30cm) Email for quotation NC33669-3 Dynasyst Elastic Thread No. 1 200 grams Email for quotation
Orfitube™ System Create low-profile, lightweight outrigger systems with Orfitubes™. - Orfitube™ System is ideal for positioning following MP arthroplasty, extensor tendon surgery and nerve injuries. - No heat is required when bending Orfitube™, for best results use Bender Tool sold below. - Orfitube™ Kit includes ten 11-13/16" (30cm) long Orfitubes™, three spools of elastic thread in varying resistance levels and two bending rods. - Bend these hard plastic tubes by hand with bending rod inside of tube. - The Single Orfitube™ Adjuster puts you in full control of longitudinal and lateral position of Orfitubes. But there is more than one angle from which you can look at this product. - The compact design allows you to fix one individual adjuster for each finger. The adjusters are lightweight, very cost-effective and more elegant than ever before - Orfitube™ End Caps help prevent fraying of the elastic thread as it glides past the cap end on the tube (sold separately). - Thermoplastic material sold separately. - Replacement Tubes also available. NC33669 Orfitube™ Kit (1) Email for quotation NC33670 Orfitube™ End Caps (20) Email for quotation NC33674 Single Orfitube™ Adjuster Kit (5) Email for quotation NC33669-1 Orfitube™ Replacement Tubes (10) 11-13/16" (30cm) Email for quotation NC33669-3 Dynasyst Elastic Thread No. 1 200 grams Email for quotation
Orfitube™ System Create low-profile, lightweight outrigger systems with Orfitubes™. - Orfitube™ System is ideal for positioning following MP arthroplasty, extensor tendon surgery and nerve injuries. - No heat is required when bending Orfitube™, for best results use Bender Tool sold below. - Orfitube™ Kit includes ten 11-13/16" (30cm) long Orfitubes™, three spools of elastic thread in varying resistance levels and two bending rods. - Bend these hard plastic tubes by hand with bending rod inside of tube. - The Single Orfitube™ Adjuster puts you in full control of longitudinal and lateral position of Orfitubes. But there is more than one angle from which you can look at this product. - The compact design allows you to fix one individual adjuster for each finger. The adjusters are lightweight, very cost-effective and more elegant than ever before - Orfitube™ End Caps help prevent fraying of the elastic thread as it glides past the cap end on the tube (sold separately). - Thermoplastic material sold separately. - Replacement Tubes also available. NC33669 Orfitube™ Kit (1) Email for quotation NC33670 Orfitube™ End Caps (20) Email for quotation NC33674 Single Orfitube™ Adjuster Kit (5) Email for quotation NC33669-1 Orfitube™ Replacement Tubes (10) 11-13/16" (30cm) Email for quotation NC33669-3 Dynasyst Elastic Thread No. 1 200 grams Email for quotation
Orfitube™ System Create low-profile, lightweight outrigger systems with Orfitubes™. - Orfitube™ System is ideal for positioning following MP arthroplasty, extensor tendon surgery and nerve injuries. - No heat is required when bending Orfitube™, for best results use Bender Tool sold below. - Orfitube™ Kit includes ten 11-13/16" (30cm) long Orfitubes™, three spools of elastic thread in varying resistance levels and two bending rods. - Bend these hard plastic tubes by hand with bending rod inside of tube. - The Single Orfitube™ Adjuster puts you in full control of longitudinal and lateral position of Orfitubes. But there is more than one angle from which you can look at this product. - The compact design allows you to fix one individual adjuster for each finger. The adjusters are lightweight, very cost-effective and more elegant than ever before - Orfitube™ End Caps help prevent fraying of the elastic thread as it glides past the cap end on the tube (sold separately). - Thermoplastic material sold separately. - Replacement Tubes also available. NC33669 Orfitube™ Kit (1) Email for quotation NC33670 Orfitube™ End Caps (20) Email for quotation NC33674 Single Orfitube™ Adjuster Kit (5) Email for quotation NC33669-1 Orfitube™ Replacement Tubes (10) 11-13/16" (30cm) Email for quotation NC33669-3 Dynasyst Elastic Thread No. 1 200 grams Email for quotation
Orfitube™ System
Create low-profile, lightweight outrigger systems with Orfitubes™.
- Orfitube™ System is ideal for positioning following MP arthroplasty, extensor tendon surgery and nerve injuries.
- No heat is required when bending Orfitube™, for best results use Bender Tool sold below.
- Orfitube™ Kit includes ten 11-13/16" (30cm) long Orfitubes™, three spools of elastic thread in varying resistance levels and two bending rods.
- Bend these hard plastic tubes by hand with bending rod inside of tube.
- The Single Orfitube™ Adjuster puts you in full control of longitudinal and lateral position of Orfitubes. But there is more than one angle from which you can look at this product.
- The compact design allows you to fix one individual adjuster for each finger. The adjusters are lightweight, very cost-effective and more elegant than ever before
- Orfitube™ End Caps help prevent fraying of the elastic thread as it glides past the cap end on the tube (sold separately).
- Thermoplastic material sold separately.
- Replacement Tubes also available.
NC33669 Orfitube™ Kit (1) Email for quotation
NC33670 Orfitube™ End Caps (20) Email for quotation
NC33674 Single Orfitube™ Adjuster Kit (5) Email for quotation
NC33669-1 Orfitube™ Replacement Tubes (10) 11-13/16" (30cm) Email for quotation
NC33669-3 Dynasyst Elastic Thread No. 1 200 grams Email for quotation
相关产品